Parts & Accessories
$8.00 - $16.00
Whisky Parts Co. Tubeless Rim Tape.
If you've heard the expression "to Stan's a tire," it's referring to Stan's Tire Sealant. Put the recommended amount in your road, mountain and cyclocross tires and it will stop slow leaks and seal small punctures. Rim strips and valves not included.
$9.99 - $12.99
- Permanently seals tube punctures up to 1/8 inch - Non toxic formula installs easily through Schrader valves - Complete with valve core remover and filler tube - Slime keg fills 160 tires at 1/2 the price per ounce of the 16 oz size
Tubeless set up should be a "set it and forget it" affair. So why are there so many tubeless valves out there with weak construction and poor design? SPANK's tubeless valves are constructed of durable brass material, and a tapered round rubber base which fits a wide range of rim designs. Extra long shafts accommodate even the deepest well rims and most troublesome of pumps. Sealed removeable valve cores for sealant injection, make set up or topping up a breeze. - Material: Brass shaft, rubber plug - Weight (g): ±18/set - Length (mm): 40 shaft (55 total length) - Features: 2 pcs per set, removable valve core for sealant injection
• Integrated presta valve extension • Machined alloy construction • Available in 30mm, 50mm, and 70mm • For use with inner tube with removable Presta valve core
$8.99 - $39.99
A new standard in tubeless sealant. Finish Line Tubeless Tire Sealant, featuring Fiberlink technology, will not cure inside the tires and doesn’t need to be refreshed every few months to maintain effectiveness. This sealant will last the entire usable life of the tire. Since there is no liquid latex or ammonia in Finish Line sealant, it is naturally non-toxic, hypoallergenic and safe for carbon fiber rims. Additionally, Finish Line Tubeless Tire Sealant cleans up easily with water – no more scrubbing or scraping cured latex from tires and rims. Fiberlink technology makes this possible. Utilizing DuPont Kevlar fibers, Fiberlink seals are extremely robust once they plug a hole. When a puncture happens, fibers rush into the wound and quickly stop air loss. As the tire flexes while it is ridden, the Fiberlink mesh tightens and reinforces itself, creating a confidence-inspiring seal that will last ride-after-ride. - Non-latex ammonia-free formulation - Kevlar reinforced Fiberlink mesh seal - Seals up to 1/4" punctures - Can be used in extreme temperatures, down to -10 degrees Fahrenheit
- High performance, professional tubular glue that dries rapidly - Each tube is usually adequate for gluing two tubular tires - Law prohibits ORM-D materials from shipping by air
The FlatAway tire liner is a lightweight strip of Aramid fiber that protects against external punctures. It is excellent for touring or urban applications. Place it between your casing and your tube and ride with more security. - Adhesive backing holds FlatAway in place
$8.00 - $50.00
Whisky’s tubeless rim tape is designed to make setup as easy as possible. Elasticity allows for smooth, even adherence while translucency lets you see where the tape contacts the rim. Different widths available to fit almost any rim.
• External presta valve extensions for deep dish rims • Machined alloy construction • Available in 30mm, 50mm, 65mm, and 70mm lengths
- 6061 Aluminum valve and cap - Removable valve core - 4mm allen key slot for easy installation and removal - Comes with round & square rubber bases for different rim types - Spare alloy valve cap with integrated valve core removal tool
$10.50 - $27.99
The next generation of tubeless sealant has arrived! Slime's Premium Tubeless Sealant is everything you could want in a bike tire sealant. Protecting you from tears and slits, Slime's tubeless sealant is designed to stay liquid longer, seal faster, extend the lifespan of your tires and carry you farther. - Protects from tears and slits up to 1/4-inch (6.35mm) - Longer Lasting: Flow Motion technology ensures a long-lasting liquid lifespan, keeping you confident that your sealant is ready to work - CO2 Compatible: CO2 won’t freeze sealant in your tire. Slime’s advanced formulation prevents your sealant from freezing or drying up when setting the bead with CO2 - Wider Coverage: Chemically engineered for optimal dispersion from bead to bead, Slime’s sealant offers wider coverage than ever before - High-Tech: Slime’s fiberweb “gauze effect” dramatically increases the surface area of your hole by overlapping long, stiff fibers with shorter flexible fibers to create both a chemical seal and a physical barrier Slime's new formula is proudly blended and bottled right here in the USA! Available in an array of sizes, from a trailside 8 oz bottle to a shop-use gallon.
$16.99 - $24.99
- 2-ply rubber shield fits between tire and tube to prevent flats
$9.99 - $153.99
Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride. Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go! - For Downhill, Enduro and Road tires - Seals tears and holes up to 6mm - Contains UV puncture detection - Won't dry out or ball - Works from 15psi-120psi and temperatures from -20°C to +50°C - Biodegradable
The Problem Solvers Presta Valve Extenders add 30 to 70mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders are for use with Presta valves that have removable cores. The proper tool for removing the cores and installing the extenders is included.
$10.99 - $16.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - MTB 50 mL: Repairs and inflates low-volume MTB tires in less than a minute. - MTB Magnum 75 mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
$19.00 - $25.00
No.9 Tubeless valves for use with Whisky Tubeless rims and most other systems. These alloy stems feature removable Presta cores and are designed to fit up to 8mm valve holes. - Available in a number of lengths and colors to perfectly fit your rims and your sense of style. - Includes two valves
Challenge's Valve Extenders screw onto the end of Presta valves to make the valves 42mm longer so that the valves will protrude through wheels with tall rims far enough to be able to attach your pump and inflate the tires. You get two extenders and a wrench for them.
$12.99 - $17.99
• 2mm TPU material with UV protection • High performance tire liners that prevent flats • Lighter and stronger than traditional liners • Two sizes available -26/29 x 1.9-2.35-inch -27-inch/700c x 18-25mm
$35.90 - $79.90
- Just like the Original version except specially designed for FatBike applications - 2-ply rubber shield fits between tire and tube to prevent flats - Fits both 26-inch and 29-inch tires
Eco-Friendly, latex-based formula simultaneously inflates and seals punctured tires within seconds. Works with tubes, tubeless, and tubular tires. Seals standard 1-2mm punctures quickly to get you back in the saddle. Enough pressure to seed a tubeless tire onto a rim; an enduro racers dream come true. For use with both presta and shrader valves. Fills a 29 x 2.4 MTB tire up to about 29psi.
Precision engineered for precise inflation of your Zipp wheels, these Zipp Tangente Valve Extenders take the hassle out of short Presta valves. - For use with threaded Presta (non-removable core) tubes - Knurled end to keep pump from slipping - Available in all lengths to match all Zipp wheels - 3mm hex broach in the barrel to guarantee a perfect seal when tightened
The Problem Solvers Presta Valve Extenders add 33 to 50mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders simply screw onto your Presta valves by hand.
$4.95 - $5.95
- Snap-On high-Pressure plasticized nylon protects tube from abrasion - Older stock is yellow, New stock is black with halo logos
Works with Zipp butyl inner tubes with a removable core as well as other leading tubular tires and inner tubes that have removable cores. Available as a kit (3 extenders and 2 wrenches) or individually. - For use with removable valve core Presta tubes - Knurled end to keep pump from slipping - 3mm hex broach in the barrel to guarantee a perfect seal when tightened - Integrated air seal
$21.99 - $27.99
- Half the weight of the original Mr. Tuffy Tire Liner - Rubber shield fits between tire and tube to prevent flats - Back of the liner is serrated to keep it in place inside the tire and curved to match the profile of the tire
Protect’Air Max is a PH neutral latex-based sealant that can be used for Road Tubeless and MTB tires. It has two functions. When used with Tubeless Ready tires, it seals the casing (MTB or road). Secondly, it acts to repair small (1-2mm) punctures that perforate the casing of the tire. If there is a puncture, the sealant acts to fill the hole and repair the tire. Note: It may not repair larger punctures. Use - For road tires add 30ml of Protect'Air Max - For MTB tires add 40ml of Protect'Air Max - Each 2-3 months, add 10-20 ml to refresh the sealant already in the tire. - 120ml bottle includes one-way valve cap that makes injection through the valve easy without any other tools - Very neutral PH—won't corrode rims
Designed to repair punctures up to 3mm, the Panaracer Tubeless Patch Kits work with all UST tires. - Includes: 8cc tube of cement, scissors, 75mm x 50mm rubber patch, and needle/awl - Works on any brand of tubeless tire
Vision's Presta Valve Extender simply screws onto your tire's built-in valve to make it long enough to protrude through your deep-section aero wheels (choose the right length to fit your rim depth). This ensures that you can keep your tires properly inflated. This lightweight and durable aluminum extender comes with a small tool (not shown) for an air-tight installation.
$9.00 - $12.00
Zipp's Valve Extension extends your threaded Presta valve to accommodate deep dish rims. Use these extenders with your favorite Zipp wheels to make short work of pumping up your tires.
Page 1 of 3 Next page