Components

- Designed to stabilize 15g spokes in most hub flanges - 1000-pack

The buyer's choice for wheel builders looking to save weight. The nipples are available with or without DT Pro Lock, a patented liquid inside the nipple thread that makes the connection between the nipple and spoke extremely durable. It pairs perfectly with any wheel, though all-brass nipples are recommended for e-bike use. - Weight: starting at 20g for 64 nipples

- Straight gauge 2.0mm with cold forging technology - Chrome nickel stainless steel with rolled threads - 222g @ 32h/265mm - Box of 100 - Nipples sold separately

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!

Origin-8's 1 1/8-inch Headset Spacers are made of lightweight and durable aluminum and come in 2mm, 5mm or 10mm thicknesses and lots of cool colors to add style to your ride. You get a bag of 10 spacers.

- Double butted 2.0/1.8/2.0mm with cold forging technology - Chrome nickel stainless steel with rolled threads - 192g @ 32h/265mm - Box of 100 - Nipples sold separately

Steel 1mm spacer fits Shimano cassette bodies - Great for 10 sp cass on 8/9 sp hubs - Also for many other fit applications

- Top lock nut for threaded headsets - Includes water seal - Bag of 10 Lock Nuts

- For square taper and flanged. - Fits most cartridge BBs - Shell: 8mm Flanged axle bolt

• 50 feet (15.2 meters) length • 5mm diameter brake cable housing

- Routes cables underneath the bottom bracket - Will not rust or corrode

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

• Replacement nut for recessed caliper brakes

- Oversize 10mm - Fits new style MTB & BMX levers - Aluminum construction

• Multi-strand construction • Length: 25 feet • Size: 4mm

Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC

- Shell: 8mm flanged axle nut - Flanged

- Flexible linear pull brake guide - Guides cable to brake arm - Bag of 10

- Sunlite Cottered Pins

- Chromoly construction - Available in open and closed end styles - 3/8 x 26T

- Aluminum w/lock nut and mount - Slotted mount design

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

Patch up punctures in your bike tires with Slime's peel and stick SKABS. No glue means no mess! These SKABS are quick and easy to apply, and come in a compact storage container. Just toss them into your bike bag. - Kit contains (6) pre-glued 1? patches and a scuffer.

- Includes everything needed to mount non-threaded brake pads to cantilever brake arms

- Steel cable noodle with alloy end caps - Includes plastic liner

- Standard steel replacement

- For MTB levers - 7mm x 1mm - Aluminum construction

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

Threaded headset keyed locknut washer - Bag of 10